Recent Topics
user Manual
I know that I may be old school, but YouTube videos do not work well as instructions for me. My desk and computer are quite a distance from my CMM's, and walking back and forth, starting and stopping, and rewinding the videos is not the easiest thing
Move CAD/Program
What's the best way to move the CAD and related features/measurements, after the program is written? My current issue is, I recently noticed my CMM table location was set too low. After updating the table location, some of my cad models are "buried" in
Saving / Sharing / Accessing Programs on another CMM
So we currently have 2 CMM's which are about 100 feet apart from each other. With Tech Supports help we were able to make a program on our manual CMM. I would no like to transfer that program to the other CMM, and store another copy on our server for
Shop Floor Mode
What size image does Shop Floor mode show? I want to add an image for the icon for visual reference, however it currently crops 98% of my full image out due to not resizing and just using set pixels. i will resize my image to fit once I know what pixel
Finding the apex of a cone
My print calls out the Position of the apex of a cone (a divot/concave shape) and I'm having a hard time getting a theoretical point on the apex. Measuring as a cone feature works fine except when I evaluate the position, it assumes it's from the base/largest
Custom Probes using Renishaw UCC server
I bought some 18MM disk probes from ITP and discovered that since they were not in the Renishaw catalog nor match anything within the Renishaw probe offerings that I could not build them in UCC server (have been using CMM manager for 5 years but this
Probe not reading correctly
I need some help. When we go to calibrate our TIP, it doesn't read correctly. So I will put on a tip 2.50 change it to 2.50. When we go to calibrate , it'll read 6.798 every time. Do anybody have a clue why this is?
Reseller
Nate As a reseller what do we do going forward for licensing, contacting, and ordering?