Renishaw
Renishaw - UCC Direct 3.0 (DCC)
UCC Direct 3.0 is an improved version of UCC Direct 2.0 driver and supports a wide variety of configurations running on a Renishaw UCC controller with tactile probing. UCC Direct 2.0 uses a sub-set of I++ commands via UCCserver and the ClientTool ...
Renishaw - UCC T3 Plus (+) / S3 / T5 / I++ (DCC)
DCC Models: UCClite, UCClite2, UCC1, UCC2, Fusion, T3, T3+, T5, S3, S3+ UCC Suite From Renishaw here. Due to a change in how UCC Server deals with "blocks" of commands, CMM-Manager (and some other brands of inspection software) will not run properly ...
Renishaw - UCC Direct 3.0/2.0 (DCC) - Hardware Diagrams
Supported and tested configurations: Manual Probe Head PH10 direct to UCC T3 PLUS (No external PHC10) PH10 to PHC10 - PHC10 controlled via RS232 to the Host PC PH10 to PHC10 - PHC10 controlled via RS232 to controller
Renishaw - UCC Direct 3.0/2.0 (DCC) - Setup/Upgrade CMM-Manager
If you have not done so, please set up the UCCserver client environment first. Instructions may be found here. For I++ users upgrading to UCC Direct 3.0/2.0 Ensure that the existing installed version of CMM-Manager is fully synced with UCCserver. ...
Renishaw - Setup the UCCserver Client Tool Environment
Please ensure your UCC controller and UCC Suite version support Client Tool Environment. See UCC Direct 2.0 (DCC) - Controller / UCC Suite versions for compatibility. For legacy UCC Direct users upgrading to UCC Direct 2.0 Make a note the current ...
Renishaw Controller / UCC Suite version support
The following table lists the supported controllers and the versions of the UCC Suite required for each. The following UCC Suite versions are not supported: 5.6.x 5.7.0, 5.7.1 5.9.x 5.10.0 Windows 11 support begins with 5.9.0 however, as noted above, ...
Renishaw - UCC Direct 2.0 (DCC)
This driver has been replaced by Direct 3.0 as of CMM-Manager 2026. It is highly recommended to use 3.0 if available on your installation as 2.0 is considered obsolete and can provide limited support. See below for information about the 3.0 driver ...
Renishaw - UCClite, UCClite2 (Manual)
Models: UCClite, UCClite2 This controller is now officially known as the MMI controller.