Moving nominals
I have a program where I do a manual plane Level, manual ID Origin sync CAD then move the probe to the location of Datum E and instruct the operator to rotate the part so datum E lines up with the probe. DCC plane, circle, Datum E Level, Align, Origin
Construct line from multiple diameters
Hello, I'm trying to find a way to construct a centerline using three diameters that I have already programmed. I'm sure there is a way but can't seem to figure out how to relate the circles I already programmed to produce essentially a center axis line.
B89 BALL BAR TEST
Hi, I have a question regarding the B89 ball-bar test. I am attempting to perform the test with 20 positions, but if there is any issue—such as a slight path interference, for example, at position 17—the test ends automatically. This prevents me from
Cad revision change
Our customer has had a revision change. The new revision moves a hole pattern. Can I replace the model in my program and correct the nominal for the moved holes. Or do I have to rewrite the entire program?
Move CAD more finegrained
Is there a way to move CAD e.g. about 51.4mm? I need to move the whole Program with CAD.. There is a transform command in the Program Window which I like more as you can enter values instead of dragging the part (which is not precise and you sometimes
Combined Position Feature is greyed out
Hey guys, can you give me a hint why this feature is greyed out? Want to report the position of a hole pattern..
How to get MAX and MIN distance report? (not in Graphical Report)
Hi all, probably a very simple question, just can't solve it: I am measuring a circular plane, located in XY plane, 50 points. As I have NO CAD files, I was wondering if there is any way to know/report the MAX value and the MIN value when reporting the
PERPENDICULARITY MMC BONUS TOLERANCE
I have a question regarding MMC with perpendicularity callout. I've attached a picture showing what I'm attempting to check and another showing how my program currently looks. I'm trying to check dim #5 with a tolerance of .0098. I'm programming this
Using Same Program for Two Different Parts
Hello, I have a question in regard to trying to copy a program for use with two different parts. I work in automotive prototype and deal mostly with automotive sub frames. I have a request in the near future to measure some subframe. Two different types
Automatic Range For Arc
When I have a pocket that is a series of internal and external arcs that are tangent to each other, and I want to measure each of the different arcs, I am currently using: 2D CAD > click arc on CAD > adjust range by dragging end points by eye is there
Image filtering
Dear all, is there a possiblity in to apply filters to the camera image I am using to take my measurements? Sometimes we face samples where the constrast change is not good enough for the edge detection to work and we need to enhance the gray value difference.
Help with Feature and Position Tolerancing
We are trying to measure the position of a hole with a tolerance of .001 MMC, with a size of .3125 +.003/-.000. In order for us to use .001 MMC tolerance in positioning, we have to document the hole information in features first with an X and Y location
Registry Options Documentation
Hey guys, there are many interesting Registry Options which are not in the Program Settings, is there any Documentation? E.g.: CmdLineAutoRun CmdLineAutoClose These Values get reset to "FALSE" on every CMM Manager Start I was hoping to find a setting
Flip part
Is it possible when using a cad model, to use the flip part function and flip the cad as well?
measuring a sphere
Is it possible to check a R 62.35 on a part that is 20.mm x 14.mm The area seams to be to small. Thought I would ask anyways.
Help documentation RE: preferences -> Ref. Frame ->show prompt for nominal feature update
I was wondering if there was help documentation regarding the new preference in Ref. Frame "show prompt for nominal feature update". I wasn't able to find anything in the help documentation. If someone could provide information or an example, I would
RENISHAW FIXTUREBUILDER
Has anyone on here used the Renishaw Fixture builder software in conjunction with the cmm-manager software and offline programming? I was hoping the models for some of their fixtures would be online but appears you have to purchase the rights to use them.
Can you interact with the points extracted from a cloud?
You extract the points from a cloud. I know you can report the locations of the individual points, but can you use that individual point data? Example: You extract cloud points that make up an arc. You want to calculate the distance between a measured
Machine Coordinate systems
I have a question regarding machine coordinate system as it relates to my CMM. I was recently thrown into learning and programming our CMM so what I have is what was here when I was given the task of programming. The attached picture shows how our table
Measure True Position from Plane
Is this possible? Cause in the True Position Command I can only select Points, Circles, Cylinders.. But no Plane.. Don't want to use only a Point..
VB Scripting for averaging diameters
I am trying to find a method to average multiple OD measurements along a tall diameter. Rather than using a calculator to type in 8 different diameters, I'd like to try and use VB. Does anyone have any ideas on this? Thank you.
ADVANCED CAD CLOUD CREATION: CONVERTING TO SINGLE POINTS
When creating any kind of Point Cloud/Cross Section/Profile measurement, is there any way to convert a pointcloud to individual points instead of one giant cluster of points? -C
password protected programs
we had a guy work at our company previously that liked lock anyone else out of editing the programs. however the programs are clunky and need modifications. is there any way to save a copy of the program and remove the password? or is my only option to
Best fit clouds to CAD
It's been awhile since I've used any CMM software, but will this setting keep the datum structure, but still allow it to rotate about the origin for best fit? Datum A is 3 points called out on a canted curved surface (and not a cylinder), Datum B is a
Features- Actuals data?
When developing a program (actually probing features) why can't I ever see actuals data? When I look at the features list, even the "actuals" show nominal & no form error. Even when I report the feature, it only shows nominals.
EM1 with 2x40mm stylus
when calibrating a probe, I look for .0003" or better. when using a EM1 with a 2x40mm stylus, should I give it more leeway? Also, i'm using a ph20 head.
cad alignment
good morning i am trying to do a simple cad alignment to a part, after i pick my points with the probe it changes the order of the points ( look at the picture points 1-6 are not in order #6 is in the middle of the point order) this seems to be giving
Sphere Model Location
Is a model of the calibration sphere saved somewhere in the files? I would like to use it in a program. I can make a model if I need to, but was just wondering if it was saved somewhere already.
Rare earth magnets
Is there a problem in using rare earth magnets to secure parts for measurement that I should be aware of, especially with regard to affecting the force module or the head? We are measuring complex shaped thin walled plastic components and in two cases
stuck CAD
My CAD seems to be stuck.... every time I open a new program, its still there. I have closed out the program, restarted everything. Any ideas?
SP25 scanning a section of circle
Similar to a question I had before, that I never really felt I got a resolution on. Scanning questions (qxcmm.com) When trying to scan a section of a circle, I adjust the "range", but the machine still tries to scan the full circle. Is there something
Substitute probe assembly
How do I substitute one probe assembly for another inside a current program. The substitute probe has all the required index/rotations (Ren PH10M/ TP20) but a different length & stylus diameter. Can I simply change the [Get probe assembly] command, or
Creating Offset Probe
Hello. Trying to create an offset probe. first question is star probe my only option? second question when calibrating star probe. does it only use the same side of calibration sphere to calibrate all sides of star probe? third question. do i enter angel
option for plating compensation
Hi all, Is there an option to add in for plating compensation, I looked in the preferences but could not find anything. Or do I have to adjust my numbers accordingly for every individual action. Thanks
Question on Free Position Alignment
I'm trying to learn to use free position alignment on my own. I'm having trouble getting started. When I open the free position alignment window, I'm just seeing an option to choose my plane and to set origin and an option to write an instructional note.
CMM Manager On-site Training - Kentwood MI
Is there anyone in the Grand Rapids area that is proficient with CMM Manager willing to provide on-site training. We are looking for someone that would be available on a regular basis for the next few months to help accelerate the knowledge of a newer
STAR PROBE QUESTION
Is there a way when using a star probe with five stylists to pick which of the five stylist you would like to use when programming offline? The software keeps picking the center one and I want one of the horizontal ones to take the measurement. Thank
Create folder and save report.
Is it possible to automatically have CMM Manager prompt for Traveler number then create a folder with that number as the name and then save report in that folder? If it is possible what's the best (easiest) way to do this? Step 6 is the step I am having
FURNITURE QUESTION
So I have a question regarding furniture. We have added a plate to our CMM for fixtures for part placement on the table. When I go to move my imported cad models it's like the system isn't seeing the plate and only the granite. So if you go to drop to
Reporting perpendicularity
Anyone know how to report a planes perpendicularity to two datums? Both datum A and B are perpendicular planes.
Next Page