Next Steps - Import CAD, Alignment, Measure Features

Next Steps - Import CAD, Alignment, Measure Features

Here’s a short video showing the typical workflow for getting started in CMM-Manager when you want to import CAD, align the part, and measure using 3D CAD.


0:00 Introduction
1:18 3-2-1 (Plane-Line-Point) Example
3:28 Edit CAD Ref Frame (reposition CAD origin locally to part)
4:28 Plane-Line-Circle Example
5:57 CAD Alignment (Best Fit) Example
7:48 RPS Alignment
12:00 Other Settings (wrapping up)

Details for individual topic can be found here:
  1. Import CAD
  2. Alignments
  3. Measure Features
Once measurements are complete, you can add reporting / dimension outputs and you'll have your first CMM-Manager program complete.
  1. Reporting

    • Related Articles

    • Programming with Part and Fixture CAD Models

      The main advantage of utilizing the fixture CAD file in conjunction with the part model is that CMM-Manager will generate a measurement path to avoid both details, eliminating any manual adjustments. For example, programming the part shown in the ...

    • Troubleshooting CAD Converter Errors

      NOTE: CAD Converter is not automatically installed as part of the CMM-Manager installation. It is a separate installer which is included in the CMM-Manager installation .zip file. The CAD Converter installer must be run after installing CMM-Manager. ...

    • Adding CAD Furniture

      What is Furniture? The furniture feature allows a user to define fixed models in the workspace that the system will consider when planning paths to avoid collisions. These furniture pieces will remain at their defined location and orientation when ...

    • RPS Alignment example

      An RPS Alignment is used to apply constraints to features in one or more axes. When applied properly six degrees of freedom are constrained / locked in a similar fashion to a 3-2-1 alignment with the added benefit of applying offsets to each feature ...

    • Training / Demo Part CAD Models

      Below are several training / demo block CAD models... Just click the image of the part you're interested in to download the CAD model.