Portable CMM
API Laser Tracker
Supported Models: Radian Core, Plus & Pro Follow the instructions in the attached API Laser Tracker Installation Guide. Issue - Failed to load "IQApiTracker.dll" error, even when the file exists On a clean 64-bit system you might see the following ...
FARO - FARO Gage and Gage Plus
Gage and Gage Plus Windows 7 (x64) Not Support in 64 bit OS. Windows 7 (x86) Install Cam2 Gage 2.2. Uninstall FaroArm USB Driver 5.7.7.8. (installed by the Cam2 Gage 2.2 installer) Install FaroArm USB Driver 5.5.4.3. (separate installer) Start Cam2 ...
Tomelleri Arm
This is for CMM-Manager 2022 and later versions using TomelleriCore software directly. Both 64-bit and 32-bit OS are supported. TomelleriCore Software Install the latest TomelleriCore software that is compatible with your Tomelleri arm. Update arm ...
RPS Metrology Smart Arm - RPS - Smart Arm
RPS - Smart Arm Install RPS Metrology KArm software utility.
iGPS / iSpace
iGPS Install Surveyor on client PC - SurveyorSetup 3.4.2 If running multiple versions of Surveyor and cannot connect to CMM-M, try this: 1) Run the ‘unregdll.bat’ file found in all of the installed Surveyor Versions 2) Run the ‘regdll.bat’ file found ...
Kreon / Baces3D
Support for 64-bit Windows OS was added in CMM-Manager 2021. Install Kreon or Baces3D arm driver software provided with your arm KreonArm Install 4.4.7.1.exe Baces3DInstall Win32 4.4.1.4 WEB.zip Start CMM-Manager offline and go to Machine Setup ...
MicroScribe - MicroScribe Arm
Install the Mus-X software included with the MicroScribe Arm If you've lost the installation CD or require a newer version of MUS, please contact Revware / MicroScribe - https://revware.net/microscribe-software/mus/ Microscribe G and M users: ...
Optical CMM / Krypton - K-CMM / Krypton (Nikon API)
Krypton OCMM K-CMM software needs to be installed
Optical CMM / Krypton - K-CMM / Krypton (direct)
Krypton OCMM K-CMM software needs to be installed
Nikon MCA I / II
MCA-I CMM-Manager 2022 and later: Supported on both 64-bit and 32-bit OS CMM-Manager 2021 and earlier: 32-bit OS only MCA Utilities needs to be installed Arm spec files are in the GSuit Parameters s.n.xxxx folder MCA-II WinRds needs to be installed - ...
Nikon MCA X
Install Nikon Metrology API 4.4 or newer: NMAPI 4.4 1. Install the Nikon Metrology API runtime (NikonMetrologyAPI_xx.exe) 2. Follow the instructions in the setup wizard. 3. Install the Nikon Metrology API for CMM-Manager ...
Romer Infinite / Stinger / etc. (Win RDS)
The Romer Infinite arm (Stinger / Nikon MCA II) is supported in Windows 7 and Windows 10 for both x86 and x64 using the Romer WinRDS utility. Windows 10x64 requires a version of WinRDS newer than 5.x in order for the driver to be recognized. WinRDS ...
Romer Absolute
CMM-Manager 2022 and later (RDS Arm/MCAx driver) Install the latest RDS software that works with your Romer Absolute arm. CMM-Manager 2021 and earlier (Nikon Metrology API driver) Install RDS software: RDS 4.2.2 Install Nikon Metrology API 4.4 or ...
zCat Portable CMM (DCC)
zCat Portable CMM Minimum Firmware: BOOT-02-06-18 (original release 3.7) Recommended Firmware: BOOT-06-01-18 (tested since 3.8 SP1) License Type: I++ / DME Required Software: Cat Smarts (included with hardware) I++ Server Type set as zCatServer - ...
FARO USB and Serial
Serial Arm Models: Gold/Silver/Sterling/Bronze No Faro software need to be installed nor any arm spec files need to be copied. Null modem serial cable always. The serial cable needs to be connected to COM1 always. If the arm does not have any LED's ...