General
Probe Compensation Explained
Probe Compensation, Vectors, and Cosine Error in CMM-Manager This article aims to break down probe compensation and its influence on measurements. What is it? In simple terms, probe compensation is the application of stylus tip radius to measurement, ...
Replacement PC with PCI expansion slot
Some CMM Interfaces Still Require Full-Size PCI Expansion Cards Several CMM interfaces, especially those tied to legacy controllers, probe systems, or motion control hardware, still rely on full-size PCI expansion cards including: Mitutoyo UC - ComUC ...
Create and manage keyboard shortcuts
Keyboard shortcuts, sometimes known as hotkeys can be created and customized in CMM-Manager. These keyboard shortcuts allow the user to access commands quickly without unnecessary mouse interactions. Default Shortcuts Some predefined shortcuts exist ...
Form vs Profile vs Cloud 2 CAD
Setup A planar surface was created in CAD, normal to the Z axis, with an X width of 50mm and a Y length of 100mm. This is used as the Nominal surface in all cases. 6 points were "measured" and the same 6 points were used for all examples. The point ...
21 CFR Part 11 (FDA) Guidelines
What is 21 CFR Part 11? 21 CFR Part 11 is a regulatory framework designed by the FDA to guide drug and medical device makers on how to create, manage, and maintain electronic records (i.e. - CMM reports) and electronic signatures. What CMM-Manager ...
Correlation Between Different Measurement Methods
This article will attempt to describe the issues involved with trying to correlate CMM measurement with Surface Plate and/or Handheld equipment inspection. The example part here has a greatly exaugurated error on the RH surface for clarity. The view ...
Backup / Restore a License to an Existing PC or a Cloned Hard Drive
Important! Please be sure to Back up the existing software before removing the license for reformatting or cloning. In all cases, you must have a 2nd PC with CMM-Manager installed as a temporary intermediate place to store the license. It cannot be ...
Windows 11
We have received several questions about Windows 11 and CMM-Manager. Renishaw has determined that they will not officially support Windows 11 until UCC Suite 5.9 at the earliest to allow sufficient time to fully test the drivers in Windows 11. We ...
Backup Controller Related Files
Instructions for exporting the machine configurations for several controllers are found below. DEVA LK / Metris / Nikon (CMM Controllers only) Renishaw DEVA These instructions apply to all current deva manual and DCC controller configurations. Back ...
CMM-Manager User Guide
CMM-Manager Help Files You will find the Help Files from the CMM-Manager application as shown below: ...or in the File System here - C:\Program Files\QxSoft\CMM-Manager xxxx\Help\CMM_Mgr_Help.CHM CMM-Manager Help Files in PDF format. These Help Files ...
National Instruments® (NI) GPIB / IEEE-488 Adapters
If you receive a warning about a non-genuine NI adapter, please be aware that some very convincing gray-market USB to GPIB adapters are available from 3rd party sources like Amazon, eBay, etc. If you see a warning in NI-Max software about a ...
Transferring a Soft Lock to a Different Computer
Important! Please be sure to Backup Existing Configuration before transferring the license. Notes: CMM-Manager must first be installed on the new computer before proceeding. If the new PC / hard drive is a ‘clone’ of the original, the license cannot ...
USB to Serial Adapter
When connecting to Serial device to PC with USB ports but no Serial / RS-232 ports, an adapter can be used. We suggest using the adapter below - this has been tested with all serial devices that CMM-Manager supports. USB to Serial Adapter (RS-232) - ...
Obtaining, Installing, and Upgrading Licenses
These instructions do not apply to obtaining a Trial License using the automated Trial License request process. License requests, installation, and upgrades are handled by the QxSoft License RUS (Remote Update System). This application can be run by ...
Recommended PC Specs / System Requirements
Recommended PC Configuration * - CMM-Manager may run on Windows 7 and 8.1 however, these versions of Windows are outdated and no longer supported by Microsoft. QxSoft does not do any testing of CMM-Manager on Windows versions prior to Windows 10 and ...
Backup and Restore / Move to a New PC
It is necessary to backup and restore CMM-Manager when porting CMM-Manager to another computer, or re-formatting the original computer CMM-Manager was installed on. This document serves as a guideline on how to backup and restore CMM-Manager, ...