Zeiss / Numerex - Robocon-II (DCC)

• Related Articles

• Zeiss / Numerex - C-90 (DCC)

  Model: C-90 Default Settings: GPIB:PAD=8,SAD=None Some newer systems may use an alternate PAD -i.e. Alt. PAD = 30 – Default PAD e.g. default PAD = 8 when used with Zeiss C90 CMM but could revert to 22 on some Windows 7 PC’s and the latest NI 488.2 ...

• Zeiss / Numerex - C-98 -99 (DCC)

  Models: C-98 (Should be tested for compatibility prior to upgrade), C-99 (fully supported) Default settings: COM port: 9600, N, 8, 1 (C99) TCP/IP:192.4.1.200:4712 (C99) UDP/IP:192.4.1.200:4712 (C98) The local PC Network Adapter address needs to be ...

• Zeiss / Numerex - Numerex Micron-X (Manual)

  Model: Numerex Micron-X Default settings: 4800, E, 7, 1 Straight through cable 25-9

• Helmel - Pro Counter II / III(Manual)

  ProCounter II - works with OS up to Windows XP(32 bit) ProCounter III - works with newer OS including Windows 7 (32 and 64 bit)

• Nikon MCA I / II

  MCA-I CMM-Manager 2022 and later: Supported on both 64-bit and 32-bit OS CMM-Manager 2021 and earlier: 32-bit OS only MCA Utilities needs to be installed Arm spec files are in the GSuit Parameters s.n.xxxx folder MCA-II WinRds needs to be installed - ...