Zeiss / Numerex - Numerex Micron-X (Manual)
Model: Numerex Micron-X
Default settings: 4800, E, 7, 1
Straight through cable 25-9
Related Articles
Zeiss / Numerex - C-90 (DCC)
Model: C-90 Default Settings: GPIB:PAD=8,SAD=None Some newer systems may use an alternate PAD -i.e. Alt. PAD = 30 – Default PAD e.g. default PAD = 8 when used with Zeiss C90 CMM but could revert to 22 on some Windows 7 PC’s and the latest NI 488.2 ...Zeiss / Numerex - Robocon-II (DCC)
Model: Robocon-II Default settings: 4800, N, 8, 1Zeiss / Numerex - C-98 -99 (DCC)
Models: C-98 (Should be tested for compatibility prior to upgrade), C-99 (fully supported) Default settings: COM port: 9600, N, 8, 1 (C99) TCP/IP:192.4.1.200:4712 (C99) UDP/IP:192.4.1.200:4712 (C98) The local PC Network Adapter address needs to be ...Sheffield - MP / SMP (Manual)
Models: MP30/35/30-II Connection: Serial / RS-232 *null modem Default settings: 9600, O, 8, 1 Some DCC capable controllers use a baud rate of 19200. After a change of baud rate from CMM-Manager Machine Setup, the controller has to be restarted. MP35 ...Mitutoyo - MAG Box (Manual)
Model: MAG box / MAG-3 Interface / Connection Type: GPIB / iEEE Install NI-488.2 Software from National Instruments GPIB Settings Primary Address: 2 Secondary Address: 96 Note - Primary and Secondary Address can be discovered (in case above values do ...