Zeiss / Numerex - C-98 -99 (DCC)

Zeiss / Numerex - C-98 -99 (DCC)

Models: C-98 (Should be tested for compatibility prior to upgrade), C-99 (fully supported)
Default settings:
COM port: 9600, N, 8, 1 (C99)
TCP/IP:192.4.1.200:4712 (C99)
UDP/IP:192.4.1.200:4712 (C98)

Notes
The local PC Network Adapter address needs to be configured as 192.4.1.199 / 255.255.255.0 for this to communicate.

    • Related Articles

    • Zeiss / Numerex - C-90 (DCC)

      Model: C-90 Default Settings: GPIB:PAD=8,SAD=None Some newer systems may use an alternate PAD -i.e. Alt. PAD = 30 – Default PAD e.g. default PAD = 8 when used with Zeiss C90 CMM but could revert to 22 on some Windows 7 PC’s and the latest NI 488.2 ...

    • Zeiss / Numerex - Robocon-II (DCC)

      Model: Robocon-II Default settings: 4800, N, 8, 1

    • Zeiss / Numerex - Numerex Micron-X (Manual)

      Model: Numerex Micron-X Default settings: 4800, E, 7, 1 Straight through cable 25-9

    • Compatible Hardware

      Compatible CMMs CMM-Manager’s unique plug-n-play interface allows users to operate many different CMMs and Metrology systems using one unified software. Meaning, less training and higher degree of program interoperability between all of your CMM ...

    • zCat Portable CMM (DCC)

      zCat Portable CMM Minimum Firmware: BOOT-02-06-18 (original release 3.7) Recommended Firmware: BOOT-06-01-18 (tested since 3.8 SP1) License Type: I++ / DME Required Software: Cat Smarts (included with hardware) I++ Server Type set as zCatServer - ...