DEA-Tutor-M (Manual)
Model: Tutor-M
Related Articles
DEA-Tutor-P (DCC)
Tutor-P Default settings: 9600, E, 8, 1 Required Files: Cosdat Binary File - Cosdat1.bin Other Files: Error Comp File - Comp.dat / comp.ascSheffield - MP / SMP (Manual)
Models: MP30/35/30-II Connection: Serial / RS-232 *null modem Default settings: 9600, O, 8, 1 Some DCC capable controllers use a baud rate of 19200. After a change of baud rate from CMM-Manager Machine Setup, the controller has to be restarted. MP35 ...Mitutoyo - UD1 PCI (Manual)
Model: UD1 PCI Card Install the driver for the UD1 PCI Card - Note: 32 and 64 bit OS supported with CMM-Manager 3.8+ Important note for UD1W.dll file - from install guide: 1. For CMM-Manager to communicate with the UD1 card, the following files are ...Mitutoyo - MAG Box (Manual)
Model: MAG box / MAG-3 Interface / Connection Type: GPIB / iEEE Install NI-488.2 Software from National Instruments GPIB Settings Primary Address: 2 Secondary Address: 96 Note - Primary and Secondary Address can be discovered (in case above values do ...DEA - Tutor, B3P, B3Cs, Leitz (DCC)
Tutor DCC controllers with Leitz protocol - see the post here: Leitz / Sharpe32z / RC1 (DCC)