Renishaw Star and Knuckle Parameters

Renishaw Star and Knuckle Parameters

The following parameters for Renishaw Star and Knuckle adapters have been verified from Renishaw CAD and physical measurement.  Parameters are given in mm and inch.

Star (Stylus) Centers

A-5000-3627 2mm Star Center


A-5000-7610 3mm Star Center


Offset Knuckles

A Angle and B Angle values should be adjusted to actual values needed at time of assembly.

A-5000-7534 2mm Offset Knuckle


A-5000-7616 3mm Offset Knuckle

Notes
This knuckle center is non-symmetrical.  The width had to be adjusted to maintain system symmetry.  Width, as measured, will actually be 7.315.  These parameters create a properly functioning model in CMM-Manager.

Inline Knuckles

A Angle and B Angle values should be adjusted to actual values needed at time of assembly.

Notes
The Stylus Knuckle Editor shows an offset knuckle.  The onscreen representation will be correct.

A-5003-4697 2mm Inline Knuckle - Fixed Rotation


A-5000-9902 2mm Inline Knuckle w/ Rotation


A-5003-4686 3mm Inline Knuckle w/ Rotation