Manual Interface - Insight Metrology - USB Interface
Insight Metrology Device Drivers:
CDM20830.zip

The latest device driver, installation guide for windows XP, 7 & 8 are all on software CD shipped from Insight Metrology. If you do not have the original CD, please send an email to
IM@InsightCMM.com
Related Articles
Manual Interface - TOPMES - AX3 USB
TOPMES AX3 USB Counter Manufactures website - AX3 unit Topmes Datasheet: 16_AX3_DS_2_en.pdf
Nikon - Optical MM-400 / Comparator (manual)
Measuring Microscope - MM400 / MM-800 Optical Comparator - V12 3rd Party optical system with analog or digital scales Most manual optical systems will use Insight Metrology IM-USB or a similar scale interface. This may vary from one region to ...
LK Metrology (DCC)
Metris / LK Default settings: Com Port Settings: 9600, N, 8, 1 TCP/IP: 212.240.51.91:1400 SP25 Instructions to register Renishaw scanning probe calibration DLL to make it work with CMM-Manager on 3rd party controllers with scanning probe - Download ...
Mitutoyo - MAG Box (Manual)
Model: MAG box / MAG-3 Interface / Connection Type: GPIB / iEEE Install NI-488.2 Software from National Instruments GPIB Settings Primary Address: 2 Secondary Address: 96 Note - Primary and Secondary Address can be discovered (in case above values do ...
Deva Installation and Setup (Manual)
This article will guide you through the complete installation and setup of CMM-Manager on a Deva Manual system. The DEVA Manual CMM-Manager Installation Guide and a sample Deva System Config file are attached below. New Installations: Important ...