Kreon / Baces3D
Support for 64-bit Windows OS was added in CMM-Manager 2021.
- Install Kreon or Baces3D arm driver software provided with your arm
- Start CMM-Manager offline and go to Machine Setup
- Select connection port
- Browse and select arm utility DLL: "KreonArm.dll" or "Baces.dll"
- Browse and select arm calibration (.cab) file
- Click Apply and Connect.
Related Articles
Compatible Hardware
Compatible CMMs CMM-Manager’s unique plug-n-play interface allows users to operate many different CMMs and Metrology systems using one unified software. Meaning, less training and higher degree of program interoperability between all of your CMM ...Import Raw Measurement Data from External Software
Introduction CMM-Manager has a built-in Import Points Operation that allows importing point data from external source such as 3rd party metrology software. Many 3rd party systems lack CAD and reporting capabilities needed for the current task... If ...Mitutoyo - UC-400 USB (DCC)
Models: UC-400 USB ComUC USB Driver Ensure the ComUC USB drivers are properly installed. The drivers may be downloaded from here: ComUC USB Driver Probe Head Controller Serial: The cable connecting to the PHC should be plugged into a serial port ...FARO USB and Serial
Serial Arm Models: Gold/Silver/Sterling/Bronze No Faro software need to be installed nor any arm spec files need to be copied. Null modem serial cable always. The serial cable needs to be connected to COM1 always. If the arm does not have any LED's ...Wenzel / Pantec - WPC / Eagle Controllers (DCC)
Models: WPC-2010, WPC-2020, WPC-2030, Eagle, Eagle Pro Not supported: WPC-2000 Default Settings: Default COM settings: 115200, N, 8, 1 (WPC2030) 38400, N, 8, 1 (WPC2020, WPC2030) 19200, N, 8, 1 (WPC2010) 4800, N, 8, 1 (HT400 jogbox) PHC Settings can ...