Switch Reference Frame only for Reporting
I'm programming a qubic part with holes in all sides and different origins on the drawing.. I'm not sure about the strategy but I have an idea and would like to hear your opinion before I start.. I would align the part and sync CAD.. Then I would measure
Vision only alignment?
Hi, I am currently playing with the trial software to assess whether we want to go ahead with purchasing. I am interested in using ONLY vision tools for this assessment. I cannot for the life of me figure out how to do a basic alignment. Any software
Cad Alignments
Hello, how do I add 2 cad alignments and save them so I can recall them in my program? Sorry if this has been answered already, but I can't find it. Thanks
Cloud to CAD Profile evaluation without Point Data Output
Hey guys, is this possible? I want only the head data and not all the point data.. Thank you!
Report On Slot Length Between Circle Centres
I have the attached drawing I have to report on. I have measured the slot as a 2D CAD Slot, but when I report on it I can only report on the overall length and width. If I try to construct a line along the axis it makes it full length not centre to centre.
Report Properties Inspector Name
I cannot get the 'Inspector' field on the Report Properties to retain the change I make to it. If I go to the Report tab in Teach On I see one name, when I run the report in Teach Off I see a different name, and no matter which I change and then save
Keep Focus on 3D-Windows while running the Program (online)
Hi, sometimes I would like to manipulate the 3D-View when running a program online.. It works but Zooming does not work.. Problem is the 3D window is losing focus in favor of the point window.. Maybe you could change this behaviour so point windows stays
Moving nominals
I have a program where I do a manual plane Level, manual ID Origin sync CAD then move the probe to the location of Datum E and instruct the operator to rotate the part so datum E lines up with the probe. DCC plane, circle, Datum E Level, Align, Origin
CMM-Manager 2024 Released Today
Download | QxSoft | CMM-Manager o 20+ customer specific requests addressed o New Revo and SP25 Scan Functions o Reporting and GD&T Enhancements o Refactored Report Profile Operation o Graphical Reporting Enhancements o Improved DMIS Execution o Automation
The CMM-Manager Team is hiring
We are looking for qualified candidates to help with CMM-Manager Support, Training, Testing, etc. This will be a full-time position located in Ohio and preferably able to work from our Columbus, OH office. https://www.linkedin.com/jobs/view/4115077511
Attention users - does anyone use Macros?
The QxSoft / CMM-Manager development team would like your input on Macros. We're under the impression that this function is no longer used by our customers. Before we deprecate / remove this functionality, we'd like to give our users a chance to provide
Cylindrical Programming
Hello, I’ve been struggling with a part we’re trying to program and have run out of ideas. I’m hoping someone might be able to provide some guidance or suggestions to help get a solid program started. I’ve attached an STP file of the part for reference.
Cad Surfaces Not Aligned
How can I fix the surfaces on a CAD model that do not align.
Reporting, and Nominals Decimal Places
It's silly for the average report, but I have a gage block stack that I am trying to measure and report to the best of my ability. I have data that is out to the millionths. I took the time to type all that into a cad model, and so now I have this cad
How to Align a Cylinder "Bullet Casing"
First off I'm fairly new to all this, I'm looking for some direction on how to align a 3D model of a bullet casing. I have tried 3-2-1 alignment along with manual alignments "Plane, Level, Set origin etc." with no success. What do I need to do to align
Move CAD more finegrained
Is there a way to move CAD e.g. about 51.4mm? I need to move the whole Program with CAD.. There is a transform command in the Program Window which I like more as you can enter values instead of dragging the part (which is not precise and you sometimes
CAD furniture to add
Rayco fixtures are a very common fixture in our CMM labs. Would it be possible to add these to the CAD furniture files? I know it would be a big undertaking to add their entire library of pieces but it would be nice to be able to build my fixture and
Combined Position Feature is greyed out
Hey guys, can you give me a hint why this feature is greyed out? Want to report the position of a hole pattern..
PERPENDICULARITY MMC BONUS TOLERANCE
I have a question regarding MMC with perpendicularity callout. I've attached a picture showing what I'm attempting to check and another showing how my program currently looks. I'm trying to check dim #5 with a tolerance of .0098. I'm programming this
Programming From CAD Without Physical Part
I think I’m missing a step when programming from CAD before the physical part is available. I don’t have this problem when I do the manual alignment as I go - I.e. before programming the DCC alignment and other features. I import the CAD, move the CAD
Using Same Program for Two Different Parts
Hello, I have a question in regard to trying to copy a program for use with two different parts. I work in automotive prototype and deal mostly with automotive sub frames. I have a request in the near future to measure some subframe. Two different types
Potential software bug, Diameter sizing
Hello, I've noticed that when you are making a positional report for holes, there seems to be some sort of bug. When you are making reports for multiple holes at the same time and changing the nominals in the "Feature Report" tab, the diameter that I
Flatness
I have an aluminum block that is roughly 3" x 5.5" I use 3-2-1 to pick up the part, then on one of the surfaces I use the plane feature to check flatness. I pick up 16 points and it spits out a flatness of .0012" When I lay the part on that surface on
Move part, still having issues
Hi All, Can anyone send me a sample of how to move part, I understand all the steps that need to happen. I'm having issues with the second alignment. For example, I align everything for the first op, check all dimensions, top and sides. I want to check
Automatic Range For Arc
When I have a pocket that is a series of internal and external arcs that are tangent to each other, and I want to measure each of the different arcs, I am currently using: 2D CAD > click arc on CAD > adjust range by dragging end points by eye is there
Nominals not reporting correctly
So, I just experienced an issue that I have never seen before. The nominals in my cloud hits all show a Z 0 which they should, but when it gets to the reporting side, they change to another value. What could have caused this to happen? I am using report
Mitutoyo UC - Establishing Machine Connection slow (Display blinks frequently)
Hey guys, I compared establishing machine connection on MCOSMOS and CMM-Manager. In MCOSMOS it blinks only one time. In CMM-Manager it blinks 8 times (1xlong, 7x short) resulting in a long connection time.. This applies both when starting CMM-Manager
Help with Feature and Position Tolerancing
We are trying to measure the position of a hole with a tolerance of .001 MMC, with a size of .3125 +.003/-.000. In order for us to use .001 MMC tolerance in positioning, we have to document the hole information in features first with an X and Y location
[Unofficial] Fix for CADConverter 2023 & Windows 7
[INSTALL CUSTOM DLL WITH CAUTION] Dev seems legit to me, he made it to get Blender working. It is a custom Implementation of api-ms-win-core-path-l1-1-0.dll for Windows 7 based on Wine code. https://github.com/nalexandru/api-ms-win-core-path-HACK/releases
Registry Options Documentation
Hey guys, there are many interesting Registry Options which are not in the Program Settings, is there any Documentation? E.g.: CmdLineAutoRun CmdLineAutoClose These Values get reset to "FALSE" on every CMM Manager Start I was hoping to find a setting
Flip part
Is it possible when using a cad model, to use the flip part function and flip the cad as well?
Move part video
Can someone tell me where I can find the move part video? It was mentioned in a conversation between Jon and Tadd 2 years ago. I'm having problems with creating the second alignment. I'm flipping the part over 180 in Y, but none of my previous features
Tips & Calibration Data get lost from time to time -> Root cause found!
Hey guys, we have the problem, that tips get lost from time to time and long time I had no idea why but I think I found the cause: - When exiting CMM-Manager all tips and calibration data gets deleted and is then written again from scratch (this takes
measuring a sphere
Is it possible to check a R 62.35 on a part that is 20.mm x 14.mm The area seams to be to small. Thought I would ask anyways.
Help documentation RE: preferences -> Ref. Frame ->show prompt for nominal feature update
I was wondering if there was help documentation regarding the new preference in Ref. Frame "show prompt for nominal feature update". I wasn't able to find anything in the help documentation. If someone could provide information or an example, I would
RENISHAW FIXTUREBUILDER
Has anyone on here used the Renishaw Fixture builder software in conjunction with the cmm-manager software and offline programming? I was hoping the models for some of their fixtures would be online but appears you have to purchase the rights to use them.
Difficulty selecting 3D CAD geometry for Measurement
I have been a CMM-M user for 13+ years. And I have sometimes had problems getting CMM-M to select the correct 3D CAD geometry when clicking on a feature. The most problematic are Cylinders and Cones..... Sometimes CMM-M has a pop-up that asks what feature
Machine Coordinate systems
I have a question regarding machine coordinate system as it relates to my CMM. I was recently thrown into learning and programming our CMM so what I have is what was here when I was given the task of programming. The attached picture shows how our table
Measure True Position from Plane
Is this possible? Cause in the True Position Command I can only select Points, Circles, Cylinders.. But no Plane.. Don't want to use only a Point..
Circular Pattern From Slot Pattern
Still working through circular slot patterns. The goal is to report the position and then the fit. Typically I create a circle from the hole pattern to use for reporting the true position of the pattern to the part and for reporting the true position
Next Page