Extract Points from Right Click Menu on Element
Hey Guys, I'm using the extract points feature on a regular basis and want to share an improvement idea. Basically I would like to right click an Element (e.g. Plane) and then have an option "Extract Points". Ideally this would apply to both the measured
Probe assembly notes
I'm not sure if there is a way to do this already, but I was thinking it would be nice to have a note field associated with the probe assemblies, so that we could make note of the component part numbers for re-ordering purposes.
Color change manual cnc
When not using cad , have a color change when using manual or cnc. currently both appear blue in the program. **suggestion from customer**
Keep Layout when switching Language
Hi, seems Layout is tied to the Language.. Would it make sense to decouple Layout and Language? Thanks for considering!
POSITION BASICS AUTO POPULATE
When entering true position basics in the main windows, what if it were to auto update the basics located in the feature report tab after you enter your actual basics after you hit apply? Thoughts????
Option to add note to a selected amount of features?
I wasn't sure if this was in the software somewhere and I'm just missing it but it would be nice to have an option to add a note to a selected amount of features. For instance, I have a part that I'm measuring 500 holes and I need to add the GD&T in the
Possibility to Add Ribbons
Hi, I like the possibility to add Toolbars, but can you add also the possibility to add Ribbons? A) There is unused Space on some Tabs which could be used for Custom Ribbons B) Ribbons have Captions while Toolbars have not Great would be the possibility
Clearance Plane and clamps
Clearance Plane – add the option to retract to the clearance plane at each touch point to avoid having to manually edit the path to avoid clamps and fixturing (defining O.D. measurement using DCC - see photo).
Mirror around Machine Axis
It might be occasionally helpful(as I'm Typing this) to be able to mirror a part around the centerline of the Machine on a selected axis. I have a part the axis of which are not square to the Machine, and mirroring around a part axis causes the mirrored
CAD Measure hole pattern
Would it be possible to add a place to rename all of the selected holes in incremental order at the same time? For instance if there are (10) .500" holes that I am measuring, I would like to see an option that names all of the holes .500_001, .500_002,
Shop Floor Question-Idea
In SFL is it possible to make a folder-program that runs program #1 and then runs program #2 in a pre determined order? Currently we are individually selecting program #1 and program #2 then clicking (Run selected programs). It would save a few clicks
Relative Measurement Features
This topic has been discussed a long time ago, but I think it is worth consideration. There are times when checking parts that have deviations from CAD, that the ability to measure features relative to previously measured features would be a big help.
Custom Probes using Renishaw UCC server
I bought some 18MM disk probes from ITP and discovered that since they were not in the Renishaw catalog nor match anything within the Renishaw probe offerings that I could not build them in UCC server (have been using CMM manager for 5 years but this